Inspection Tables
Doyle Systems offers a line of standard and custom manufactured quality control inspection tables. This line also incorporates our extensive line of “LandSco” Surface Inspection Lighting for a wide variety of application requirements. This lighting is multi-direction and designed to view surfaces of samples in their entirety from 28″ x 40″ up to 46″ x 240″. Cross machine, machine direction, overhead blacklight and fluorescents and through lighting are available. Curtains are optional.
The Doyle “LandSco Light” is available in many configurations. From a single table top inspection light for small samples to large format inspection tables with multiple light sources. Inspection tables can be custom designed to provide inspection of paper in any length from 48” to over 200”. The lighting can be configured to view the large paper samples in the machine and cross machine direction, backlighting, overhead lighting and overhead ultraviolet lighting.
Each lighting source provides several specific uses:
- Machine direction: The light shines in the machine direction on the paper showing defects in the cross-machine direction such as scratches, pits, embosses, fibers bonded at one end, coating skips, calendaring problems.
- Cross machine direction: The light shines in the cross machine direction, showing defects in the machine direction such as scratches, pits, embosses, coating problems, doctor blade scratches, repetitive marks.
- Back lighting: The light is behind the translucent inspection surface, showing through the paper to show paper formation, opacity, foreign objects, and pinholes.
- Ultraviolet overhead: Used to bring out the application of any brighteners, either in the paper or in the coating process to look for the amount and evenness of application, or to check for any foreign particle that may fluoresce.
- Overhead Lighting: Used primarily for color rendition and evenness.
Not all manufacturing requires every option. The inspection tables can be custom-engineered to incorporate only the lighting options required based on the products being manufactured.
* This quality control tool has been proven to provide extremely quick ROI and has unrivaled acceptance as a tool all quality control managers should be relying on.
Utilizes one 300 watt lamp.
Inspection Table Light (ITL)
- ITL (short throw light) is designed to turn a flat, level surface into an inspection area of sizable proportions.
- Can illuminate surfaces from 40″ wide within 3″ from the light to 96″ wide just 48″ from the light, with an effective depth view of over 60″.
- All operating controls are located on the side of the unit for operator convenience.
Multiple ITL units can be used together on a common on/off and light intensity control for implementation in very wide format applications.
Model H / HA
- Used for on-machine inspection or can be mounted to an inspection table for off-machine inspection or table top use.
- Can illuminate surfaces 22″ – 96″ wide up to 140″ deep.
Model HA includes a remote control with a 12′ cable for dimming and on/off operation.
Model Super H
- Designed for large format viewing in the manufacturing of flooring, carpeting, gypsum board and door manufacturing or anywhere a large sample requires inspection.
- Can be located as close as 24″ from the sample and can illuminate a 65″ wide area to over 216″ wide at a 200″+ depth.
Offers twice the viewing area of the smaller Model H unit, but is just 30″ wide.